Test cryostats

General view of several test cryostats in a laboratory cabinet. Shelves of a cabinet with different metal cylinders fitted with windows and connectors
Organizational Unit
MECHANICS DEPARTMENT

Grants related:

Description

Test cryostats are equipment that allows testing of all types of devices under high vacuum and very low temperature conditions, typically at 200 degrees below zero. For the realization of the tests, the cryostats have optical windows and electrical and mechanical connections with the exterior, maintaining the cryogenic conditions. Its main use is the characterization of optical components, mechanisms, sensors, etc. in realistic working and environmental conditions, before its final assembly in the instruments. Several cryostats with different cooling systems and sizes are available, depending on the dimensions and characteristics of the components to be characterize. Part of the equipment of this laboratory has been financed by ERDF funds.

Related Technical facility
General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
Mechanical Integration and Verification Laboratory
The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
Alberto
Hernández González
Image of the quadrupole mass spectrometer in the laboratory. Close-up view of the medium-sized metallic cube device placed on a table with electronic connectors on its back
Quadrupole mass spectrometer
Analyser of residual gases
Panoramic view of one the areas of the Assembly, Integration and Verification room. Large laboratory with work benches and multiple electronic devices and computers, with a large mechanical structure in assembly phase
Large Instruments Assembly, Integration and Verification Room (AIV)
The purpose of the AIV Room is the assembly, integration and verification of instrumentation for large telescopes.
José Miguel
Delgado Hernández
Related Capability
Rear view of the EMIR instrument in GTC with engineers working on the cryogenic system. Large cylindrical structure with metallic tubes and electronic controls
Design, development and manufacture of cryogenic and vacuum systems
The astronomical observation in the infrared range of the spectrum requires the use of cryogenic systems where high vacuum and very low temperature technologies are combined.
Type
Mechanic
Equiment type
Testing equipment

It may interest you

  • General view of the Mechanical Integration and Verification Laboratory. Medium-sized laboratory with work benches, electronic devices, mechanical tools and cabinets
    Mechanical Integration and Verification Laboratory
    The Mechanical Integration and Verification Laboratory provides the basic and specific infrastructures needed for the development and integration of the medium-sized mechanical systems developed at the Technology Division.
    Alberto
    Hernández González
  • Panoramic view of the CAD studio with engineers working with desktop computers
    CAD/CAE Studio
    The CAD/CAE room concentrates the special facilities for mechanical engineering design and calculation.
    Afrodisio
    Vega Moreno
  • Partial view of the mechanics workshop with technicians working. Author A. L. Aldai. Large workshop with several manufacturing machines and a technician on the right adjusting a piece in one of them
    Mechanics Workshop
    The Mechanics Workshop main purpose is the manufacture, measurement and assembly of mechanical parts.